QXP 100G QSFP28 AOC is available in lengths of 1 to 50m on OM3 multimode fiber (MMF). It has 4 independent full-duplex channels up to 25Gbps data rate per wavelength. It complies with IEEE 802.3bm 100GBASE SR4 and uses reliable VCSEL array technology and hot-pluggable QSFP28 package.

QXP 100G QSFP28 SR4 module is designed as a four-channel and parallel transceiver for 100Gbps fiber-communication. Each channel can operate at 25Gbps up to 100m on OM4 MM fiber.

QXP 100G QSFP28 CWDM4 transceiver uses 4x25G electrical interface and has a maximum power consumption of 3.5W. It supports 103.125Gb/s aggregate bit rate and up to 2km transmission on single mode fiber without FEC.

QXP 200G AOC is a Four-Channel, Pluggable Active Optical Cable (AOC) for QSFP56 solution. The AOC integrate 4 independent transmit and receive channels, each capable of 26.56Gbd/s PAM4 operation for an aggregate data rate of 212.5Gb/s, which provides increased port density and total system cost savi

QXP 200G QSFP56 FR4 module is designed for 200G Ethernet 2km transmission. It optically multiplexes 4ch CWDM wavelength in transmitter side, and demultiplexes to 4 different wavelength in receiver side.

QXP 400G AOC is compliant with the QSFP-DD MSA Rev5.0 and IEEE 802.3bs, IEEE802.3cm, and Common Management Interface Specification Rev4.0. It is an assembly of eight full-duplex lanes, where each lane is capable of transmitting data at rates up to 53.125Gb/s PAM-4.

QXP 400G QSFP-DD FR4 module is designed for 400G Ethernet 2km transmission. It optically multiplexes 4ch CWDM wavelength in transmitter side, and demultiplexes to 4 different wavelength in receiver side.

QXP 400G QSFP-DD DR4 1310nm Transceiver is designed for 400G Ethernet with a maximum transmission distance of 500m on OM4 multi-mode fiber. It can be used in various network applications, such as Internet protocol switches and routers.

QXP CWDM chip use unique cascaded MZ technology, with low loss and large bandwidth features. Input and output ports MFD are matched with SMF, working distance large and coupling efficiency high, can greatly simplifying transceiver production process.

QXP LWDM chip use unique cascaded MZ technology, with low loss and large bandwidth features. Input and output ports MFD are matched with SMF, working distance large and coupling efficiency high, can greatly simplifying transceiver production process.